D380 Iontophoretic Dye Marker

D380 Iontophoretic Dye Marker

FEATURES

  • Holding current of ±6nA.
  • Injection current of ±12nA.
  • Polarity reversal for de-blocking purposes.
  • For pipette resistances of up to 500Mohms.
  • LCD Display screen

Description

DESCRIPTION

The D380 Iontophoretic Dye Marker from Digitimer provides an isolated, bipolar and constant current output intended for cell labelling or cell marking of individual neurons with charged dyes, such as Lucifer Yellow, via iontophoresis.

Holding currents of up to ±6nA and injection currents up to ±12nA are possible and precisely set by single-turn panel mounted dials on the D380 Dye Marker. A compliance voltage in excess of ±6V allows the full injection current into electrodes with impedances up to 500Mohms. An LCD screen on the front of the D380 continuously displays the polarity and magnitude of the requested Injection and Holding currents as well as the electrode resistance and the voltage applied. The unit is powered from a single, standard, 9 Volt battery.

A novel feature of the D380 Iontophoretic Dye Marker is that the injection current polarity can be easily reversed by a push button switch to facilitate electrode de-blocking.

You can contact us to find out further information about the D380 Dye Marker. Email us at sales@digitimer.com or give us a call on 01707 328347. By doing so you can learn more from our experienced team regarding the D380 as well as the full collection of products we supply.

Read more

DOWNLOADS

Product Information

D380 Iontophoretic Dye Marker

DOWNLOAD BROCHURE

Digitimer-Life-Science-Brochure-1

FAQS

The D380 included a TTL-gate BNC input socket, which allows a TTL high input to activate the injection current. This means that external devices can be used to control the timing of current delivery.

The 9V battery will last a long time (approx. 100 hours continuous use), however, if you start to see “Compliance Error” on the display, this is an indication that the voltage available is no longer adequate to pass the requested current. At this point, either the electrode impedance is higher than normal or the battery is failing.

The D380 is not supplied with any connection cables for the pipette/electrode, so we recommend you fabricate this link using a low leakage coaxial cable. The core should be connected to the pipette containing the dye and the shield should be in electrical contact with the bathing medium so that the circuit is completed and current can flow.

GET SUPPORT